Electrician in Clinton County

Lock Haven is on PPL. If the whole street is out, report it to PPL at 1-800-342-5775. If it's just your house, or one room, that's usually a breaker or a wiring problem, which is where we come in. Our emergency line is answered 24/7.

The big ones: GFCI outlets in the kitchen, bathrooms, and basement; no overloaded power strips or extension cords running the place; a panel with no scorched or double-tapped breakers; and working smoke alarms. We can walk through the property and give you a straight list of what needs fixing.

Yes, regularly. A lot of Lock Haven homes still have 100-amp service or an older panel that's out of room. We run a load calculation, make sure the right permits are pulled, and coordinate with PPL on the service work.

Yes. That usually means a buried line from your house, a small subpanel in the garage, and enough capacity for lights, outlets, and tools. If you want a welder or an EV charger out there later, tell us now so we size it right the first time.

A quick dip when a big motor starts can be normal. Lights that dim a lot, flicker on their own, or dim across the whole house point to a loose connection or an overloaded panel. Those are worth a look before they turn into a burned connection.

Some brands, like Federal Pacific (Stab-Lok) and Zinsco, have well-known problems with breakers that don't trip. If your panel has one of those names on it, or it's a fuse box, it's worth having us look at. Not sure? Email a photo to OttaElectric@OttaElectric.com.

No power means no water, so the well pump is the first thing to back up. A generator wired through a transfer switch or interlock kit can run your well pump, furnace, and fridge, without powering the whole house.

Yes. Long runs need the right wire size so you don't lose voltage by the time it gets there. We'll figure out the route and the load before we dig.

If you've lost electronics or appliances in a storm, it's worth it. A surge protector at the panel helps protect everything in the house, not just what's plugged into a power strip. It's a quick add-on when we're already working on your panel.